ZQDF (Y) steam (solenoid) solenoid valve
- sell：021-32051999
- sell：021-32050777
- fax：021-66099555
Details
- Product Introduction
- Service Promise
- Ordering Process
ZQDF (Y) series steam (liquid) solenoid valve is an actuator used in industrial process automation control system. It can open or close the valve automatically after receiving the electronically controlled signal, realizing the on-off or flow control of fluid medium in the pipeline, thereby automatically adjusting the temperature, flow rate, pressure and other parameters in the system or far away. Process control.
This series of solenoid valve products can be widely used in textile, printing, chemical, plastic, rubber, pharmaceutical, food, building materials, machinery, electrical appliances, surface treatment and other production and scientific research departments, as well as bathroom, canteen, air conditioning and other daily life facilities. ZQDF series is mainly used for the control of air, steam, gas and other gas media; ZQDF-Y series solenoid valves are mainly used for tap water, distilled water, frozen brine, electroplating waste liquids and other liquid media, but also for oil viscosity less than 4 degrees E.
Structural characteristics
Corrosion resistance: the main parts of the valve plug, valve body and so on are made of stainless steel and cast steel and have good anticorrosive property.
Heat resistance: The electromagnetic and sealing parts are all made of special high temperature resisting electrical materials and sealing materials, and effective heat insulation measures are adopted.
Wear resistance: material selection is reasonable, valve plug and valve body skillfully use the lubrication effect of fluid, reduce wear.
Condensation resistance: condensate in steam pipeline is an important factor affecting the operation of steam solenoid valve, the valve is not affected by condensate.
Structure and principle
The valve is a step-by-step direct pilot solenoid valve, which can be divided into normal closed solenoid valve and normal open solenoid valve according to the different open and close states when power is off. Normally closed solenoid valve, after the coil is electrified, the armature first drives the auxiliary valve plug to be lifted under the action of electromagnetic force. The fluid on the main valve cup flows away through the auxiliary valve, reducing the pressure on the main valve cup. When the pressure on the main valve cup decreases to a certain value, the armature drives the main valve cup and opens the main valve cup by using the pressure difference. Medium circulation. After the power is cut off, the electromagnetic force will disappear, and the armature will be reset because of its weight drop. At the same time, the main and auxiliary valves can be tightly closed depending on the medium pressure. Normally open solenoid valve, coil power on, moving iron core down, the secondary valve plug pressure, the secondary valve closed, the main valve cup pressure rise, when the pressure rises to a certain value, the main valve cup pressure difference is the same, because of electromagnetic force, moving iron core driving the main valve cup, pressure main valve seat, valve closed . When the coil is cut off, the electromagnetic suction is zero, the auxiliary valve plug and the movable iron core are lifted upward due to the spring action, the auxiliary valve opens, the fluid on the main valve cup flows away through the auxiliary valve, reducing the pressure on the main valve cup. When the pressure on the main valve cup is reduced to a certain value, the main valve cup is pushed up by the pressure difference, and the main valve opens. Medium circulation
Model description
参数/型号 | ZQDF-1 | ZQDF-2 | ZQDF-3 | ZQDF-1Y | ZQDF-2Y | ZQDF-3Y | |||
公称压力（MPa） | 1.6 | ||||||||
工作压差 （MPa） | DN15～50 | 0～1.6 | |||||||
DN65～100 | 0.05～1.6 | ||||||||
介质种类 | 煤气、空气等 | 饱和蒸汽 | 过热蒸汽 或高温气体 | 水油液体 | 热水 | 高温水、油 | |||
介质温度℃（mm） | ≤60 | ≤180 | ≤220 | ≤60 | ≤180 | ≤220 | |||
公称通径（ mm ） | 15 | 20 | 25 | 32 | 40 | 50 | 65 | 80 | 100 |
流量系数（Kv值） | 3.8 | 7.4 | 10.3 | 18.8 | 25.7 | 41 | 58 | 85 | 154 |
阀体材质 | 不锈钢；碳钢 | ||||||||
电源电压 | AC220V DC24V 其余规格可作特殊订货 | ||||||||
使用寿命 | 按JB/T7352-94规定 | ||||||||
泄漏量（ml/min) | 按JB/T7352-94·F规定 | ||||||||
功耗VA | ≤50 | ||||||||
公称 通径 DN | 内螺纹连接 | 法兰连接 | |||||||||
外形尺寸 | 内螺纹 | 外形尺寸 | 法兰尺寸 | ||||||||
H | L | G | H | L | D | D1 | D2 | b | f | n-d | |
15 | 148 | 92 | 1/2″ | 176 | 130 | 95 | 65 | 46 | 14 | 2 | 4-Ø14 |
20 | 148 | 92 | 3/4″ | 181 | 150 | 105 | 75 | 56 | 16 | 2 | 4-Ø14 |
25 | 148 | 110 | 1″ | 210 | 160 | 115 | 85 | 65 | 16 | 3 | 4-Ø14 |
32 | 182 | 120 | 11/4″ | 221 | 180 | 140 | 100 | 76 | 18 | 3 | 4-Ø18 |
40 | 182 | 140 | 11/2″ | 230 | 200 | 150 | 110 | 84 | 18 | 3 | 4-Ø18 |
50 | 192 | 162 | 2″ | 252 | 230 | 165 | 125 | 99 | 20 | 3 | 4-Ø18 |
65 | 265 | 290 | 185 | 145 | 118 | 20 | 3 | 4-Ø18 | |||
80 | 276 | 310 | 200 | 160 | 132 | 20 | 3 | 8-Ø18 | |||
100 | 373 | 350 | 220 | 180 | 156 | 22 | 3 | 8-Ø18 | |||
The best quality, first-class service Qigao creates more value for you!
"Qigao Valve" expects to continuously improve service quality and strive for excellence. "Sincere service" is the eternal theme of "Qigao". "Qigao" strictly followsIS09001-2000 Quality system certification requirements, strict quality control, responsibility to people, to ensure the healthy operation of production, sales and service. Strengthen communication with users and provide quality products to our customers with perfection and perfect service. Hereby our factory makes the following commitments:
Product Standards：
Products in strict accordance with ChinaGB、HG Standard and USAPISuch as standard design, manufacturing, acceptance. The hardness of the sealing surface meets the requirements of the state and the width exceeds the national standard.
pre-sale service：
Product introduction, technical exchange, non-standard product design, troubleshooting。
Sale service：
A trustworthy contract guarantees timely delivery and keeps in touch with customers. For special or duplicate products, our factory arranges technicians to use and troubleshoot the products for users.
After sales service：
1、"Qigao" brand product quality period is from the factory12In the month, the implementation of the "three guarantees" service (return, replacement, warranty).
2、During the use of our products, our factory regularly organizes technical and quality inspection personnel to visit and consult users for feedback on product quality, usage status and improvement opinions, so as to further improve product quality.
3、Respond quickly to the quality of user complaints, after-sales service personnel rushed to the scene in 24-36 hours (48 hours outside the province).
4、For after-sales service, users are required to fill out the quality feedback information form after the service and make an appraisal opinion in order to improve the service quality of Qigao.
1、If the customer has special requirements for the product, the following instructions must be provided in the order contract.：
a、Structure length；
b、Connection Type；
c、Nominal diameter, full diameter, reduced diameter, pipe size;
d、Operating medium and temperature, pressure range；
e、Tests, inspection standards and other requirements
2、The factory can configure various types of driving devices according to customer's specific requirements.。
3、If the type and model of the valve are determined by the customer, the customer shall correctly state the meaning and requirements of the model and sign the contract under the condition that the supplier and the buyer understand each other.
4、For futures and order customers, please call us in advance to tell the required valve model, specification, quantity, delivery time and location, and timely transfer to the factory account according to the total 30% deposit or full payment. The rest of the payment is pending. Import before shipment to arrange delivery in time.
Order Process：
1、Customer purchase list fax to021-33872143，Or call us 021-33872141
2、Receive customer purchase list, provide valve model selection and quotation (price list)。
3、Specific agreement: delivery date, special requirements, etc.。
download Google：
1、If the customer has special requirements for the product, the following instructions must be provided in the order contract.：
|
|||||
|
|||||
2、The factory can configure various types of driving devices according to customer's specific requirements.。
|
|||||
3、If the type and model of the valve are determined by the customer, the customer shall correctly state the meaning and requirements of the model and sign the contract under the condition that the supplier and the buyer understand each other.
|
|||||
4、For futures and order customers, please call us first to tell the required valve model, specifications, quantity, delivery time and location, and press the total30%The deposit or full payment will be remitted to our factory account in time.， The rest of the payment will be remitted before shipment to arrange delivery in time.。
|
Sale service：
Trustworthy contract, guarantee timely delivery, keep in touch with customers at any time。
For special or duplicate products, our factory arranges technicians to use and troubleshoot the products for users.
After sales service：
1、"Qigao" product quality period is from the factory12Month, practice“Three packs”Service (return, replacement, warranty)。
2、During the use of our products, our factory regularly organizes technical and quality inspection personnel to visit and consult users for feedback on product quality, usage status and improvement opinions.，
In order to further improve product quality。
3、Respond quickly to the quality of user complaints, after-sales service personnel24-36Hours (outside the province48Hour) rushed to the scene。
4、For after-sales service, the user is required to fill out the quality feedback information form after the service and make an appraisal opinion in order to improve the service quality of “Qigao”.。
statement |
|