必赢626net入口|主页

ZSPC/ZSNC pneumatic piston cut-off valve

ZSPC/ZSNC pneumatic piston cut-off valve
  • sell:021-32051999
  • sell:021-32050777
  • fax:021-66099555

Details

  • Product Introduction
  • Service Promise
  • Ordering Process

ZSPC pneumatic piston cut-off valve/ZSNC pneumatic piston cut-off valve consists of pneumatic piston actuator and cutting mechanism. According to the material of valve core sealing surface, it can be divided into hard sealing and soft sealing, and according to the structure type of valve core, it can be divided into single guiding plate type and single guiding balance type. The utility model has the advantages of simple structure, reliable movement, close cutting and fast closing. It is suitable for the automatic control system of gas and liquid medium without granule and impurity, which requires fast and tight closing and quick emptying.


Main technical parameters of pneumatic piston cut-off valve

公称通径 mm
20
25
40
50
65
80
100
150
200
250
300
阀座直径 mm
20
25
32
40
50
65
80
100
125
150
200
可与本公司
商洽生产
额定流量系数 Kv
6.5
10
15
25
40
65
100
150
260
350
540
公称压力 MPa
1.6 ; 4.0 ; 6.4
行 程 mm
10
16
25
30
40
60
流量特性
快 开
介质温度 ℃
软密封:-40~150(常温型) ; 硬密封:-40~200(常温型); -40~450(中温型)
法兰尺寸、型式
PN16按JB79-59; PN4.0、64按JB/T79.2-94凹式
阀体材质
ZG230-450 ; ZG1Cr18Ni9Ti;ZGOCr18Ni12Mo2Ti
阀座、阀芯材质
1Cr18Ni9 ; 0Cr18Ni12Mo2Ti
上阀盖型式
普通式(常温型) ; 热片式(中温型)
可配附件
手轮机构、空气过滤减压器、电磁阀、信号回讯器等

Note: flange, GB, ANSI, JPI and DIN can be provided. Flange spacing can be determined according to user needs.


Actuating mechanism of pneumatic piston cut-off valve


公称通径 mm
执行机构型号
气缸直径 mm
行程 mm
进气孔螺纹
备注
常温型
中温型
常温型
中温型
常温型
中温型
20
ZSPA-1、ZSPB-1
ZSPA-1、ZSPB-1
ZSN-1
150
150
10
M16×1.5
M16×1.5
ZSP:单作用
ZSN:双作用
25
40
ZSPA-2、ZSPB-2
ZSN-1
200
16
50
65
ZSPA-2、ZSPB-2
ZSPA-3、ZSPB-3
ZSN-2
200
300
25
M20×1.5
80
100
30
150
ZSPA-3、ZSPB-3
ZSPA-4、ZSPB-4
ZSN-3
300
400
40
M20×1.5
M24×2
200
60


Performance index of pneumatic piston cut-off valve


公称通径 mm
20
25
40
50
65
80
100
150
200
阀座直径 mm
32
40
50
65
80
100
125
150
200
软密封泄漏量
水 试
△P=△Pmax
ml/min
0
气 试
△P=0.35MPa
气泡数/min
1
1
2
3
4
6
11
18
27
45
硬密封泄漏量
水 试 MPa
4.0
3.0
ml/min
0.24
0.30
0.38
0.48
0.60
0.78
0.96
1.2
1.125
1.35
1.8
气试△P=0.35MPa
ml/min
23.3
29.2
37.3
46.7
58
75.8
93.3
116.7
145.8
175
233.3
切断时间 s
0.5
1
1.5
2
3
4
额定行程偏差%
+6


Allowable pressure difference for pneumatic piston shut-off valve
公称通径 mm
20
25
40
50
65
80
100
150
200
气缸直径 mm
150
200
300
400
气源压力KPa
500
允许压差
整机
气关式
流开
4.0
4.0
2.6
2.2
3.8
2.6
2.0
1.95
1.59
流关
4.0
4.0
4.0
3.1
3.1
2.1
1.6
2.0
1.63
整机
气开式
流开
4.0
3.0
2.1
1.7
1.7
1.1
0.9
0.52
0.43
流关
4.0
4.0
1.0
4.0
4.0
3.6
2.7
3.4
2.2
Dimensions of pneumatic piston cut-off valve
公称通径 DN
20
25
40
50
65
80
100
150
200
L
PN MPa
1.6
194
197
235
267
292
317
368
500
635
4.0
650
6.4
206
210
251
286
311
337
394
520
650
H
65
70
85
90
100
105
125
170
205
不带手轮
H1
常温型
445
455
485
485
605
605
620
962
988
中温型
596
606
636
636
770
770
785
1178
1226
带手轮
H1
常温型
630
640
670
670
790
790
805
1087
1113
中温型
781
791
821
821
955
955
970
1303
1351
H2
160
160
160
160
160
160
270
270
270
H3
220
220
220
220
220
220
390
390
390

The best quality, first-class service Qigao creates more value for you!

"Qigao Valve" expects to continuously improve service quality and strive for excellence. "Sincere service" is the eternal theme of "Qigao". "Qigao" strictly followsIS09001-2000 Quality system certification requirements, strict quality control, responsibility to people, to ensure the healthy operation of production, sales and service. Strengthen communication with users and provide quality products to our customers with perfection and perfect service. Hereby our factory makes the following commitments:

Product Standards:

Products in strict accordance with ChinaGB、HG Standard and USAPISuch as standard design, manufacturing, acceptance. The hardness of the sealing surface meets the requirements of the state and the width exceeds the national standard.

pre-sale service:

Product introduction, technical exchange, non-standard product design, troubleshooting。

Sale service:

A trustworthy contract guarantees timely delivery and keeps in touch with customers. For special or duplicate products, our factory arranges technicians to use and troubleshoot the products for users.

After sales service:

1、"Qigao" brand product quality period is from the factory12In the month, the implementation of the "three guarantees" service (return, replacement, warranty).

2、During the use of our products, our factory regularly organizes technical and quality inspection personnel to visit and consult users for feedback on product quality, usage status and improvement opinions, so as to further improve product quality.

3、Respond quickly to the quality of user complaints, after-sales service personnel rushed to the scene in 24-36 hours (48 hours outside the province).

4、For after-sales service, users are required to fill out the quality feedback information form after the service and make an appraisal opinion in order to improve the service quality of Qigao.

1、If the customer has special requirements for the product, the following instructions must be provided in the order contract.:

a、Structure length;

b、Connection Type;

c、Nominal diameter, full diameter, reduced diameter, pipe size;

d、Operating medium and temperature, pressure range;

e、Tests, inspection standards and other requirements

2、The factory can configure various types of driving devices according to customer's specific requirements.。

3、If the type and model of the valve are determined by the customer, the customer shall correctly state the meaning and requirements of the model and sign the contract under the condition that the supplier and the buyer understand each other.

4、For futures and order customers, please call us in advance to tell the required valve model, specification, quantity, delivery time and location, and timely transfer to the factory account according to the total 30% deposit or full payment. The rest of the payment is pending. Import before shipment to arrange delivery in time.

 

Order Process:

1、Customer purchase list fax to021-33872143,Or call us 021-33872141

2、Receive customer purchase list, provide valve model selection and quotation (price list)。

3、Specific agreement: delivery date, special requirements, etc.。

download Google:

1、If the customer has special requirements for the product, the following instructions must be provided in the order contract.:

a、Structure length;

b、Connection Type;

c、Nominal diameter, full diameter, reduced diameter, pipe size;

d、Operating medium and temperature, pressure range;

e、Tests, inspection standards and other requirements

2、The factory can configure various types of driving devices according to customer's specific requirements.。

3、If the type and model of the valve are determined by the customer, the customer shall correctly state the meaning and requirements of the model and sign the contract under the condition that the supplier and the buyer understand each other.

4、For futures and order customers, please call us first to tell the required valve model, specifications, quantity, delivery time and location, and press the total30%The deposit or full payment will be remitted to our factory account in time., The rest of the payment will be remitted before shipment to arrange delivery in time.。

Sale service:

Trustworthy contract, guarantee timely delivery, keep in touch with customers at any time。

For special or duplicate products, our factory arranges technicians to use and troubleshoot the products for users.

After sales service:

1、"Qigao" product quality period is from the factory12Month, practiceThree packsService (return, replacement, warranty)。

2、During the use of our products, our factory regularly organizes technical and quality inspection personnel to visit and consult users for feedback on product quality, usage status and improvement opinions.,
In order to further improve product quality。

3、Respond quickly to the quality of user complaints, after-sales service personnel24-36Hours (outside the province48Hour) rushed to the scene。

4、For after-sales service, the user is required to fill out the quality feedback information form after the service and make an appraisal opinion in order to improve the service quality of “Qigao”.。

statement

  1. All text, data and pictures in this article are for reference only.ZSPC/ZSNC pneumatic piston cut-off valvePlease contact us at 4000-700-665 for details of performance, size and price.
  2. If there is no explanation, this article is original, reprint, please indicate the address of this article, thank you for your cooperation!