必赢626net入口|主页

Adjustable bimetallic drain valve

Adjustable bimetallic drain valve
  • sell:021-32051999
  • sell:021-32050777
  • fax:021-66099555

Details

  • Product Introduction
  • Service Promise
  • Ordering Process

The CS17H / CS47H / CS67H adjustable bimetal sheet trap is the most robust of the thermostatic traps. Its advantages are: not afraid of water hammer, high pressure resistance, small size, light weight, not afraid of freezing, can automatically exhaust air, any position can be installed; back pressure rate is more than 80%.


The trap is suitable for steam pipe main pipe, pipe network heat tracing, instrument heat tracing, living heating and heating equipment with high temperature condensate allowed to drain, and has a wide range of applications.


Characteristic


1. the condensate discharge temperature can be adjusted and the sensible heat of condensate can be effectively utilized.


2. there is always condensation water before the valve, forming water seal and no steam leakage.


3. it can be installed at any angle, and the drainage temperature can be adjusted at any time.


4. anti water hammer, good exhaust performance.


5. spherical closing mode, long service life.


Working principle


The adjustable bimetallic steam trap is driven by the bimetallic temperature sensing element to drive the valve core to switch valves. When the device is just started, low-temperature condensate appears in the pipeline, the bimetal sheet is flat, and the valve core is in the open position under the elastic force of the spring. As the condensate temperature increases, the bimetal sheet sensing element begins to bend and deform, pushing the valve center to the closed position. Before the condensate reaches the saturation temperature, the steam trap is completely closed. There is always high temperature condensation water before the valve, no steam leakage and good energy saving effect.


Main technical parameters


项 目
型号
单位
CS17H一16C
CS47H一16C
CS67H一16C
CS17H一25
CS47H一25
CS67H一2S
CS17H-40
CS47H-40
CS67H一40
公称压力
1.6
2,5
4.O
MPa
壳体试验压力
2.4
3.8
6.0
MAX工作压力
1.6
2.5
4.0
MAX工作温度
203
220
247
MAX允许温度
425
425
425
工作介质
蒸汽、凝结水


Main dimensions


产品型号
通径 (mm)
连接方式
工作压力
范围
(Mpa)
MAX充许
温度(℃)
阀体材料
外形尺寸
L
H1
H2
W
LTB6
(CS17H-16C)
15-25
螺纹
0.01-1.6
220
WBC A105
95
111
23
60
LTB6F
CS47H-16C
15
法兰
0.01-1.6
220
WBC A105
150
111
23
60
20
法兰
0.01-1.6
220
WBC A105
160
111
23
60
25
法兰
0.01-1.6
220
WBC A105
160
111
26
60
32
法兰
0.01-1.6
220
WBC A105
210
118
27
61
40
法兰
0.01-1.6
220
WBC A105
230
123
30
66
50
法兰
0.01-1.6
220
WBC A105
230
123
30
66
(LTB6W)
CS67H-16C
15
承插焊
0.01-1.6
220
WBC A105
95
106
35
58
20
承插焊
0.01-1.6
220
WBC A105
95
106
35
58
25
承插焊
0.01-1.6
220
WBC A105
95
106
35
58
(TB11)
CS17H-16C
15
螺纹
0.01-1.6
220
WBC A105
95
106
35
58
20
螺纹
0.01-1.6
220
WBC A105
95
106
35
58
25
螺纹
0.01-1.6
220
WBC A105
95
106
35
58
(TB11F)
CS47H-16C
15
法兰
0.01-1.6
220
WBC A105
150
111
23
60
20
法兰
0.01-1.6
220
WBC A105
160
111
23
60
25
法兰
0.01-1.6
220
WBC A105
160
111
26
60
32
法兰
0.01-1.6
220
WBC A105
210
118
27
61
40
法兰
0.01-1.6
220
WBC A105
230
123
30
66
50
法兰
0.01-1.6
220
WBC A105
230
123
30
66
LTB3
CS17H-16C
15
螺纹
0.1-1.6
350
WBC A105
85
80
23
54
20
螺纹
0.1-1.6
350
WBC A105
85
80
23
54
25
螺纹
0.1-1.6
350
WBC A105
85
80
23
54
LTB3F
CS17H-16C
15
法兰
0.1-1.6
350
WBC A105
150
80
23
54
20
法兰
0.1-1.6
350
WBC A105
15.
80
23
54
25
法兰
0.1-1.6
350
WBC A105
160
80
23
54
LTB3W
CS17H-16C
15
承插焊
0.1-1.6
350
WBC A105
85
80
23
54
20
承插焊
0.1-1.6
350
WBC A105
85
80
23
54
25
承插焊
0.1-1.6
350
WBC A105
85
80
23
54
LTB5
CS67H-16C
15-25
螺纹
0.01-1.6
350
WBC A105
85
90
20
62
LTB5F
CS17H-16
15-20
25
法兰
0.01-1.6
350
WBC A105
150
160
80
23
54
(LTB5W)
CS67H-16C
15-25
承插焊
0.01-1.6
350
WBC A105
85
80
23
54


The best quality, first-class service Qigao creates more value for you!

"Qigao Valve" expects to continuously improve service quality and strive for excellence. "Sincere service" is the eternal theme of "Qigao". "Qigao" strictly followsIS09001-2000 Quality system certification requirements, strict quality control, responsibility to people, to ensure the healthy operation of production, sales and service. Strengthen communication with users and provide quality products to our customers with perfection and perfect service. Hereby our factory makes the following commitments:

Product Standards:

Products in strict accordance with ChinaGB、HG Standard and USAPISuch as standard design, manufacturing, acceptance. The hardness of the sealing surface meets the requirements of the state and the width exceeds the national standard.

pre-sale service:

Product introduction, technical exchange, non-standard product design, troubleshooting。

Sale service:

A trustworthy contract guarantees timely delivery and keeps in touch with customers. For special or duplicate products, our factory arranges technicians to use and troubleshoot the products for users.

After sales service:

1、"Qigao" brand product quality period is from the factory12In the month, the implementation of the "three guarantees" service (return, replacement, warranty).

2、During the use of our products, our factory regularly organizes technical and quality inspection personnel to visit and consult users for feedback on product quality, usage status and improvement opinions, so as to further improve product quality.

3、Respond quickly to the quality of user complaints, after-sales service personnel rushed to the scene in 24-36 hours (48 hours outside the province).

4、For after-sales service, users are required to fill out the quality feedback information form after the service and make an appraisal opinion in order to improve the service quality of Qigao.

1、If the customer has special requirements for the product, the following instructions must be provided in the order contract.:

a、Structure length;

b、Connection Type;

c、Nominal diameter, full diameter, reduced diameter, pipe size;

d、Operating medium and temperature, pressure range;

e、Tests, inspection standards and other requirements

2、The factory can configure various types of driving devices according to customer's specific requirements.。

3、If the type and model of the valve are determined by the customer, the customer shall correctly state the meaning and requirements of the model and sign the contract under the condition that the supplier and the buyer understand each other.

4、For futures and order customers, please call us in advance to tell the required valve model, specification, quantity, delivery time and location, and timely transfer to the factory account according to the total 30% deposit or full payment. The rest of the payment is pending. Import before shipment to arrange delivery in time.

 

Order Process:

1、Customer purchase list fax to021-33872143,Or call us 021-33872141

2、Receive customer purchase list, provide valve model selection and quotation (price list)。

3、Specific agreement: delivery date, special requirements, etc.。

download Google:

1、If the customer has special requirements for the product, the following instructions must be provided in the order contract.:

a、Structure length;

b、Connection Type;

c、Nominal diameter, full diameter, reduced diameter, pipe size;

d、Operating medium and temperature, pressure range;

e、Tests, inspection standards and other requirements

2、The factory can configure various types of driving devices according to customer's specific requirements.。

3、If the type and model of the valve are determined by the customer, the customer shall correctly state the meaning and requirements of the model and sign the contract under the condition that the supplier and the buyer understand each other.

4、For futures and order customers, please call us first to tell the required valve model, specifications, quantity, delivery time and location, and press the total30%The deposit or full payment will be remitted to our factory account in time., The rest of the payment will be remitted before shipment to arrange delivery in time.。

Sale service:

Trustworthy contract, guarantee timely delivery, keep in touch with customers at any time。

For special or duplicate products, our factory arranges technicians to use and troubleshoot the products for users.

After sales service:

1、"Qigao" product quality period is from the factory12Month, practiceThree packsService (return, replacement, warranty)。

2、During the use of our products, our factory regularly organizes technical and quality inspection personnel to visit and consult users for feedback on product quality, usage status and improvement opinions.,
In order to further improve product quality。

3、Respond quickly to the quality of user complaints, after-sales service personnel24-36Hours (outside the province48Hour) rushed to the scene。

4、For after-sales service, the user is required to fill out the quality feedback information form after the service and make an appraisal opinion in order to improve the service quality of “Qigao”.。

statement

  1. All text, data and pictures in this article are for reference only.Adjustable bimetallic drain valvePlease contact us at 4000-700-665 for details of performance, size and price.
  2. If there is no explanation, this article is original, reprint, please indicate the address of this article, thank you for your cooperation!