DX7K41X hydraulic controlled slow closing check butterfly valve
- sell:021-32051999
- sell:021-32050777
- fax:021-66099555
Details
- Product Introduction
- Service Promise
- Ordering Process
DX7K41X type storage tank type hydraulic control slow-closing check butterfly valve is the key control equipment used at the inlet of hydraulic turbine at present. It has good sealing and regulating performance. This valve is a new product developed by Qigao valve in recent years. Through careful investigation and Research on many similar products at home and abroad, it creates a unique Three-eccentricity valve. For the basic structure of the hydraulic butterfly valve, after field application, the operating system runs well, the butterfly valve in addition to the advantages of the three eccentric structure has the following obvious advantages and characteristics.
main features
1. The driving system of this valve is a two-stage driving device with the same pressure. The volume of this device is small and the opening and closing speed of the butterfly valve is wide. The initial opening section is controlled by high pressure and small flow rate. The instantaneous state of the butterfly valve opening is smooth and there is no violent fluctuation. The hidden danger of water hammer in the system is completely eliminated. Then, the turning angle speed of the butterfly valve is cut into relatively fast and the hydraulic pressure is controlled. The cylinder will be smoothly opened with the set of ideal thrust and speed.
2. The installation position of the butterfly valve is usually transverse horizontal. The proper placement of the deviation position of the butterfly plate can make the butterfly plate close smoothly by making full use of the hydrodynamic torque in the pipeline. The installation position of the valve will reflect the effect of the interaction between the hydrodynamic torque and the weight torque. As the closing angle is gradually completed, the hydrodynamic torque will tend to be the same. As a result, the zero leakage sealing effect will be reliably realized in this reasonably rigorous control system.
3. The electro-hydraulic control system of this valve has remote control function. The opening and closing of butterfly plate at any speed and the locking at any position can be easily realized by various kinds of hydraulic control valves with reasonable design.
4, the valve is equipped with manual oil pump, the system can shut down or open the butterfly valve normally because of power failure.
Model design of butterfly valve with hydraulic control slow closing check valve
Model | Nominal pressure(MPa) | Experimental pressure(MPa) | Applicable temperature(℃) | Applicable medium | ||||
Shell experiment | Seal test | |||||||
DX7K41H-6C | 0.6 | 0.9 | 0.66 | ≤65 | 水 | |||
DX7K41H-10C | 1.0 | 1.5 | 1.1 | |||||
project | Nominal path | |||||||
DN≤1000 | DN≥1400 | |||||||
Open valve time(S) | 10~60 tunable | 15~60tunable | ||||||
Closing time(S) | Fast closing | 1.2~25tunable | 2~30tunable | |||||
Slow down | 2~60tunable | 4~60tunable | ||||||
Valve angle(°) | Fast closing | 60°±10° | ||||||
Slow down | 25°±10° |
Name Model | valve body | Disc | Butterfly plate seal ring | Stem | valve seat | filler |
DX7K41H-6/10 Z | Gray cast iron | Spheroidal graphite cast iron | NBR | Chromium stainless steel | Copper alloy | O rubber ring |
DX7K41H-6/10 C | carbon steel | carbon steel | Stainless steel | Chromium stainless steel | Stainless steel | Flexible graphite |
Nominal path(mm) | Main dimensions(mm) | (kg) | |||||
L | L1 | E | E1 | H | H1 | ||
500 | 350 | 800 | 1442 | 920 | 420 | 1100 | 1500 |
600 | 390 | 800 | 1634 | 1200 | 440 | 1500 | 1800 |
700 | 430 | 800 | 1728 | 1200 | 500 | 1200 | 2000 |
800 | 470 | 800 | 2000 | 1200 | 510 | 1210 | 2500 |
900 | 510 | 800 | 2130 | 1200 | 570 | 1270 | 3000 |
1000 | 550 | 800 | 2410 | 1300 | 620 | 1620 | 3000 |
1200 | 630 | 800 | 2600 | 1355 | 710 | 1710 | 4200 |
1400 | 710 | 800 | 2825 | 1355 | 820 | 1820 | 4900 |
1600 | 790 | 890 | 3141 | 1355 | 920 | 1920 | 5900 |
1800 | 870 | 890 | 3423 | 1760 | 1035 | 2035 | 6300 |
2000 | 950 | 890 | 3623 | 1860 | 1150 | 2140 | 6170 |
The best quality, first-class service Qigao creates more value for you!
"Qigao Valve" expects to continuously improve service quality and strive for excellence. "Sincere service" is the eternal theme of "Qigao". "Qigao" strictly followsIS09001-2000 Quality system certification requirements, strict quality control, responsibility to people, to ensure the healthy operation of production, sales and service. Strengthen communication with users and provide quality products to our customers with perfection and perfect service. Hereby our factory makes the following commitments:
Product Standards:
Products in strict accordance with ChinaGB、HG Standard and USAPISuch as standard design, manufacturing, acceptance. The hardness of the sealing surface meets the requirements of the state and the width exceeds the national standard.
pre-sale service:
Product introduction, technical exchange, non-standard product design, troubleshooting。
Sale service:
A trustworthy contract guarantees timely delivery and keeps in touch with customers. For special or duplicate products, our factory arranges technicians to use and troubleshoot the products for users.
After sales service:
1、"Qigao" brand product quality period is from the factory12In the month, the implementation of the "three guarantees" service (return, replacement, warranty).
2、During the use of our products, our factory regularly organizes technical and quality inspection personnel to visit and consult users for feedback on product quality, usage status and improvement opinions, so as to further improve product quality.
3、Respond quickly to the quality of user complaints, after-sales service personnel rushed to the scene in 24-36 hours (48 hours outside the province).
4、For after-sales service, users are required to fill out the quality feedback information form after the service and make an appraisal opinion in order to improve the service quality of Qigao.
1、If the customer has special requirements for the product, the following instructions must be provided in the order contract.:
a、Structure length;
b、Connection Type;
c、Nominal diameter, full diameter, reduced diameter, pipe size;
d、Operating medium and temperature, pressure range;
e、Tests, inspection standards and other requirements
2、The factory can configure various types of driving devices according to customer's specific requirements.。
3、If the type and model of the valve are determined by the customer, the customer shall correctly state the meaning and requirements of the model and sign the contract under the condition that the supplier and the buyer understand each other.
4、For futures and order customers, please call us in advance to tell the required valve model, specification, quantity, delivery time and location, and timely transfer to the factory account according to the total 30% deposit or full payment. The rest of the payment is pending. Import before shipment to arrange delivery in time.
Order Process:
1、Customer purchase list fax to021-33872143,Or call us 021-33872141
2、Receive customer purchase list, provide valve model selection and quotation (price list)。
3、Specific agreement: delivery date, special requirements, etc.。
download Google:
1、If the customer has special requirements for the product, the following instructions must be provided in the order contract.:
|
|||||
|
|||||
2、The factory can configure various types of driving devices according to customer's specific requirements.。
|
|||||
3、If the type and model of the valve are determined by the customer, the customer shall correctly state the meaning and requirements of the model and sign the contract under the condition that the supplier and the buyer understand each other.
|
|||||
4、For futures and order customers, please call us first to tell the required valve model, specifications, quantity, delivery time and location, and press the total30%The deposit or full payment will be remitted to our factory account in time., The rest of the payment will be remitted before shipment to arrange delivery in time.。
|
Sale service:
Trustworthy contract, guarantee timely delivery, keep in touch with customers at any time。
For special or duplicate products, our factory arranges technicians to use and troubleshoot the products for users.
After sales service:
1、"Qigao" product quality period is from the factory12Month, practice“Three packs”Service (return, replacement, warranty)。
2、During the use of our products, our factory regularly organizes technical and quality inspection personnel to visit and consult users for feedback on product quality, usage status and improvement opinions.,
In order to further improve product quality。
3、Respond quickly to the quality of user complaints, after-sales service personnel24-36Hours (outside the province48Hour) rushed to the scene。
4、For after-sales service, the user is required to fill out the quality feedback information form after the service and make an appraisal opinion in order to improve the service quality of “Qigao”.。
statement |
|