Manual regulating valve
- sell:021-32051999
- sell:021-32050777
- fax:021-66099555
Details
- Product Introduction
- Service Promise
- Ordering Process
Manual control valves are only applicable to steam or hot water pipes with nominal pressure < 1.6 MPa and < 2.5 MPa and medium temperature T < 200 and < 350 for regulating flow rate.
The manual control valve can be closed by rotating the hand wheel clockwise. At this time, the valve stem drives the valve disc down, so that the two conical sealing surfaces contact tightly until the pipeline is closed. The manual valve manufactured by our factory is suitable for the best energy-saving products of urban central heating or regional heating, mainly for regulating the flow rate.
Characteristics of manual control valve
1. To improve the heating supply, all the branches and thermodynamic points of manual control valves can be adjusted according to the design conditions to achieve good temperature conditions. This kind of control valve has better regulation performance than gate valve and globe valve, and it has similar linear regulation performance. Therefore, the cooling and heating phenomena of heating buildings have been effectively improved.
2. Energy saving: due to the imbalance of temperature and pressure in the heat pipe network, some branch flow is too large, so that some building temperature is too high, users have to open windows, to achieve the purpose of energy saving.
3. Improve the hydraulic condition of network management: Manual control valve can control according to the rated flow rate, reduce the flow rate of network management overrun, and make the original water condition deterioration to a certain extent.
Manual control valve main parts material
零件名称 | 材料 |
阀体、阀盖、填料压盖 | 灰铸铁、铸钢、不锈钢、黄铜 |
阀杆、阀瓣、密封圈 | 不锈钢 |
阀杆螺母 | 黄铜 |
Main dimensions of manual control valves
(flange joint size: PN10 according to GB4216 standard, PN16, PN25 according to JB/T97-94 standard)
型号 | 尺寸(MM) | |||||||||||||||||||
DN | 15 | 20 | 25 | 32 | 40 | 50 | 65 | 80 | 100 | 125 | 150 | 200 | 250 | 300 | 350 | 400 | 450 | 500 | 600 | |
T40H-10 T40H-10 | L | 622 | 698 | 787 | 914 | 978 | 978 | 1295 | ||||||||||||
H | 914 | 914 | 968 | 968 | 1100 | 1440 | 1790 | |||||||||||||
H1 | 1074 | 1074 | 1168 | 1168 | 1350 | 1440 | 1790 | |||||||||||||
D0 | ||||||||||||||||||||
T40H-16 T40H-16C TS40H-16 TS40H-16C TJ40H-25 TS40H-25 | L | 130 | 150 | 160 | 180 | 200 | 230 | 290 | 310 | 350 | 400 | 480 | 600 | |||||||
H | 160 | 160 | 182 | 192 | 250 | 264 | 380 | 413 | 466 | 540 | 623 | 687 | ||||||||
H1 | 172 | 172 | 195 | 210 | 273 | 290 | 426 | 468 | 530 | 613 | 698 | 777 | ||||||||
D0 | 65 | 65 | 80 | 80 | 120 | 120 | 200 | 200 | 240 | 260 | 360 | 400 | ||||||||
TJ10H-10 TJ10H-16C TJ10H-25 | L | 90 | 100 | 120 | 140 | 170 | 200 | |||||||||||||
H | 150 | 160 | 182 | 192 | 250 | 264 | ||||||||||||||
H1 | 160 | 170 | 197 | 207 | 270 | 284 | ||||||||||||||
D0 | 80 | 80 | 80 | 90 | 100 | 120 |
The best quality, first-class service Qigao creates more value for you!
"Qigao Valve" expects to continuously improve service quality and strive for excellence. "Sincere service" is the eternal theme of "Qigao". "Qigao" strictly followsIS09001-2000 Quality system certification requirements, strict quality control, responsibility to people, to ensure the healthy operation of production, sales and service. Strengthen communication with users and provide quality products to our customers with perfection and perfect service. Hereby our factory makes the following commitments:
Product Standards:
Products in strict accordance with ChinaGB、HG Standard and USAPISuch as standard design, manufacturing, acceptance. The hardness of the sealing surface meets the requirements of the state and the width exceeds the national standard.
pre-sale service:
Product introduction, technical exchange, non-standard product design, troubleshooting。
Sale service:
A trustworthy contract guarantees timely delivery and keeps in touch with customers. For special or duplicate products, our factory arranges technicians to use and troubleshoot the products for users.
After sales service:
1、"Qigao" brand product quality period is from the factory12In the month, the implementation of the "three guarantees" service (return, replacement, warranty).
2、During the use of our products, our factory regularly organizes technical and quality inspection personnel to visit and consult users for feedback on product quality, usage status and improvement opinions, so as to further improve product quality.
3、Respond quickly to the quality of user complaints, after-sales service personnel rushed to the scene in 24-36 hours (48 hours outside the province).
4、For after-sales service, users are required to fill out the quality feedback information form after the service and make an appraisal opinion in order to improve the service quality of Qigao.
1、If the customer has special requirements for the product, the following instructions must be provided in the order contract.:
a、Structure length;
b、Connection Type;
c、Nominal diameter, full diameter, reduced diameter, pipe size;
d、Operating medium and temperature, pressure range;
e、Tests, inspection standards and other requirements
2、The factory can configure various types of driving devices according to customer's specific requirements.。
3、If the type and model of the valve are determined by the customer, the customer shall correctly state the meaning and requirements of the model and sign the contract under the condition that the supplier and the buyer understand each other.
4、For futures and order customers, please call us in advance to tell the required valve model, specification, quantity, delivery time and location, and timely transfer to the factory account according to the total 30% deposit or full payment. The rest of the payment is pending. Import before shipment to arrange delivery in time.
Order Process:
1、Customer purchase list fax to021-33872143,Or call us 021-33872141
2、Receive customer purchase list, provide valve model selection and quotation (price list)。
3、Specific agreement: delivery date, special requirements, etc.。
download Google:
1、If the customer has special requirements for the product, the following instructions must be provided in the order contract.:
|
|||||
|
|||||
2、The factory can configure various types of driving devices according to customer's specific requirements.。
|
|||||
3、If the type and model of the valve are determined by the customer, the customer shall correctly state the meaning and requirements of the model and sign the contract under the condition that the supplier and the buyer understand each other.
|
|||||
4、For futures and order customers, please call us first to tell the required valve model, specifications, quantity, delivery time and location, and press the total30%The deposit or full payment will be remitted to our factory account in time., The rest of the payment will be remitted before shipment to arrange delivery in time.。
|
Sale service:
Trustworthy contract, guarantee timely delivery, keep in touch with customers at any time。
For special or duplicate products, our factory arranges technicians to use and troubleshoot the products for users.
After sales service:
1、"Qigao" product quality period is from the factory12Month, practice“Three packs”Service (return, replacement, warranty)。
2、During the use of our products, our factory regularly organizes technical and quality inspection personnel to visit and consult users for feedback on product quality, usage status and improvement opinions.,
In order to further improve product quality。
3、Respond quickly to the quality of user complaints, after-sales service personnel24-36Hours (outside the province48Hour) rushed to the scene。
4、For after-sales service, the user is required to fill out the quality feedback information form after the service and make an appraisal opinion in order to improve the service quality of “Qigao”.。
statement |
|