ZAZ (P/N/M) electric control valve
- sell:021-32051999
- sell:021-32050777
- fax:021-66099555
Details
- Product Introduction
- Service Promise
- Ordering Process
ZAZP electric single-seat regulating valve, ZAZN electric double-seat regulating valve and ZAZM electric sleeve regulating valve are the executive units of DKZ electric unit combination instrument. It is one of the important links in the automatic regulating system of production process. It takes AC220V power supply voltage as the driving force, accepts the unified standard signal of 0~10mA DC or 4~20mA DC, and converts this into input. The signal corresponding to the upper and lower displacement, automatically control the valve, change the valve opening displacement, so as to achieve the process pipeline fluid medium such as pressure, flow, temperature, liquid level and other parameters of automatic control.
ZAZP, ZAZN and ZAZM electric control valves can be divided according to the mode of operation.
Positive action: electric closed open type (when the electrical signal increases when the valve position downward displacement), "B".
Reaction: electric open - normally closed (when the electrical signal increases when the valve position upward displacement), "K".
ZAZP, ZAZN, ZAZM electric control valves are widely used in chemical industry, petroleum, metallurgy, power plants, light textile, papermaking and pharmaceutical production process automation and remote control.
There are standard type, bellows sealed type, jacket insulation type and other varieties. Product pressure level has PN1.64.06.4 MPa; nominal diameter DN20-300 mm; applicable fluid temperature has - 40-450; according to the temperature of different valve cover can be divided into normal temperature type, high temperature type; flow characteristics have equal percentage (logarithmic) and linear.
ZAZP electric single-seat regulating valve is composed of DKZ straight-way electric actuator and straight-through low-flow resistance single-seat valve. It has only one seat and a plunger-shaped spool and has good sealing performance. The guiding part adopts (upper and lower double-guide or bushing top-guide) structure. It has the characteristics of large guiding area and strong anti-vibration performance, and is suitable for medium leakage. There are strict requirements for the quantity of the occasion, but due to the structural reasons of the valve, the unbalanced force on the stem is larger, especially in the nominal diameter of large conditions more obvious, so the valve is only suitable for the occasion of small pressure difference.
ZAZN electric double-seat regulating valve is composed of DKZ straight-way electric actuator and straight-through low flow resistance double-seat valve. The valve core is stable and reliable in the process of displacement. There are two seats and two plunger-shaped spools in the valve body. The fluid medium flows out through the upper and lower spool seat. It has large flow rate, large allowable pressure difference and small unbalanced force. A balanced double-seat valve is suitable for occasions where the medium is not very clean and the leakage requirement is not strict.
ZAZM electric sleeve regulating valve is composed of DKZ electric actuator and straight through low flow resistance balance sleeve valve. The spool adopts pressure balance spool. The spool is cylindrical. The spool is guided by the inner cylinder and the top of the sleeve. Therefore, the unbalanced force on the spool is very small, the operation is stable and the performance is good. It is a force balance regulating valve. When the pressure difference between the front and back ends is high, the vibration caused by the swirl impact is weakened because the spool is side-directed by the sleeve, so the valve has the advantages of low noise, small cavitation flashing effect, long service life and so on. But the leakage rate of the valve seat is slightly larger than that of the single seat valve.
Actuator of electric control valve
型号 | DKZ-310/310C | DKZ-410/410C | DKZ-510/510C | |||||||||
推力N | 4000 | 6400 | 16000 | |||||||||
行程 | 10 | 16 | 25 | 30 | 18 | 30 | 40 | 60 | 30 | 50 | 60 | 100 |
全行程时间S | 8 | 12.5 | 20 | 24 | 15 | 24 | 32 | 48 | 16 | 30 | 37 | 62 |
DKZ type direct stroke electric actuator can be used with DDZ-III type instrument, and can also be used with assembly instrument and TA instrument. It takes 220V power supply as power 4 20mmA. DC, converts this into the output shaft linear displacement corresponding to the input signal, automatically controls the control valve or other terminal mechanism to complete the automatic adjustment task, or matches. Electric operator realizes manual remote control.
The instrument has three control modes: continuous adjustment, manual control and in-situ manual operation. The automatic control system with DKZ straight stroke electric actuator needs to be equipped with ZPE-3101 servo amplifier, DFD-1000 electric actuator or manual operator to realize manual_automatic non-disturbance switching of the automatic control system.
Electric control valve performance index
项目 | 指标 | |
基本误差% | ≤±5.0 | |
回差% | ≤3.0 | |
死区% | ≤3.0 | |
泄漏量 | 单座阀 | 10-4×阀的额定容量 |
双座阀 | 10-3×阀的额定容量 | |
套筒阀 | 10-3×阀的额定容量 |
使用情况 | 阀芯处于流开状态,关闭时阀后压力P2=0 | ||||||||||
公称通径 DN(mm) | 阀座直径 DN(mm) | 执行机构 you效推力 (N) | 允许压差(MPa) | ||||||||
电动单座调节阀 | |||||||||||
PN1.6(MPa) | PN6.4(MPa) | ||||||||||
20 | 10 | 12 | 15 | 20 | 400,1000,2500 | 公称压力 | 3.8 | 2.7 | 1.7 | 1.0 | |
公称压力 | 4.3 | 2.5 | |||||||||
25 | 26 | 400,1000,2500 | 0.5 | 公称压力 | 0.6 | 3.6 | |||||
32 | 32 | 0.4 | 公称压力 | 0.4 | 2.3 | ||||||
40 | 40 | 400,1000 2500,6400 | 0.7 | 1.0 | 0.7 | 1.5 | |||||
50 | 50 | 0.5 | 1.0 | 0.5 | 1.0 | ||||||
65 | 66 | 6400,16000 | 1.4 | 1.4 | |||||||
80 | 80 | 1.0 | 1.0 | ||||||||
100 | 100 | 0.6 | 0.6 | ||||||||
125 | 125 | 6400,16000 | 0.5 | 1.0 | 0.5 | 1.0 | |||||
150 | 150 | 0.3 | 0.7 | 0.3 | 0.7 | ||||||
200 | 200 | 0.2 | 0.4 | 0.2 | 0.4 | ||||||
250 | 250 | 16000 | 0.3 | 0.3 | |||||||
300 | 300 | 0.2 | 0.2 |
材料代号 | C(WCB) | P(304) | R(316) | |
主要 零件 | 阀体,阀盖 | WCB(ZG230-450) | ZG1Cr18Ni9Ti(304) | ZG1Cr18Ni12Mo2Ti(316) |
阀芯,阀座 | 1Cr18Ni9Ti(304)或司钛莱合金堆焊 | 1Cr18Ni9Ti(304)或司钛莱合金堆焊 | 1Cr18Ni12Mo2Ti(316)或司钛莱合金堆焊 | |
阀杆 | 2Cr13 | 1Cr18Ni9Ti | 1Cr18Ni12Mo2Ti | |
填料 | V型聚四氟乙烯(F4),柔性石墨,不锈钢波纹管 | |||
垫片 | 增强聚四氟乙烯 (F4),不锈钢垫片,金属石墨缠绕垫片 | |||
推杆,衬套 | 2Cr13 | |||
适用 工况 | 适用介质 | 水,蒸汽,油品类气液体 | 硝酸碱类腐蚀性气液体 | 醋酸类等腐蚀性气液体 |
常温型 | -30∼+250 F4:≤200℃ | -40∼+250 F4:≤200℃ | -40∼+250℃ F4:≤200℃ | |
高温型 | -30∼+450℃ | -40∼+450℃ | -40∼+450℃ |
公称通径mm | 20 | 25 | 32 | 40 | 50 | 65 | 80 | 100 | 125 | 150 | 200 | 250 | 300 | ||||
阀座直径mm | 20 | 25 | 32 | 40 | 50 | 65 | 80 | 100 | 125 | 150 | 200 | 250 | 300 | ||||
额定流量 系数Kv | 单座 | 5 | 8 | 12 | 20 | 32 | 50 | 80 | 120 | 200 | 280 | 450 | 800 | 1200 | |||
双座 | 10 | 16 | 25 | 40 | 63 | 100 | 160 | 250 | 400 | 630 | 1000 | 1600 | |||||
套筒 | 全量 | 15 | 35 | 50 | 125 | 190 | 400 | 630 | |||||||||
0.6 | 9 | 20 | 30 | 75 | 115 | 240 | 350 | ||||||||||
额定行程L(mm) | 10 | 16 | 25 | 40 | 60 | 100 | |||||||||||
执行器型号 | DKZ-310 | DKZ-310 | DKZ-310 | DKZ-410 | DKZ-410/510 | DKZ-510 | |||||||||||
出轴推力N•m | 4000 | 4000 | 4000 | 6400 | 6400/16000 | 16000 | |||||||||||
全行程时间S | 8 | 12.5 | 20 | 32 | 48/37 | 62 | |||||||||||
电源电压 | AC220V 50Hz | ||||||||||||||||
输入信号 | 4∼20mA DC 0∼10mA DC | ||||||||||||||||
输入阻抗 | Ⅱ型:200Ω Ⅲ型:250Ω | ||||||||||||||||
作用模式 | 电开式(K)型,电关式(B)型 | ||||||||||||||||
流量特性 | 等百分比,直线,快开性 | ||||||||||||||||
允许泄漏量(L/h) | 单座≤10-4×阀额定容量;双座≤10-3×额定容量;套筒:≤10-3×阀额定容量 | ||||||||||||||||
固有可调比R | 30:1 | ||||||||||||||||
公称压力PN(MPa) | 1.6 2.5 4.0 6.4 |
Main dimensions of electric control valve
Electric single seat regulating valve and electric double seat regulating valve
公称通径 DN | A×B | L | H | H1 | ||||||
ZAZP单座 | ZAZN双座 | |||||||||
PN1.6 | PN4.0 | PN6.4 | 普通型 | 热片型 | 普通型 | 热片型 | ZAZP | ZAZN | ||
20 | 230×460 | 180 | 185 | 190 | 653 | 804 | / | / | 91 | / |
25 | 185 | 190 | 205 | 665 | 816 | 670 | 820 | 112 | 104 | |
32 | 200 | 210 | 220 | 671 | 822 | 673 | 823 | 118 | 107 | |
40 | 220 | 230 | 240 | 683 | 834 | 693 | 843 | 129 | 126 | |
50 | 250 | 255 | 265 | 698 | 849 | 698 | 848 | 144 | 131 | |
65 | 230×530 | 275 | 285 | 295 | 789 | 949 | 799 | 959 | 175 | 175 |
80 | 305 | 310 | 325 | 792 | 952 | 809 | 969 | 191 | 190 | |
100 | 350 | 355 | 370 | 796 | 956 | 821 | 981 | 195 | 202 | |
125 | 260×630 | 410 | 425 | 440 | 847 | 1062 | 872 | 1087 | 243 | 250 |
150 | 450 | 460 | 475 | 855 | 1070 | 882 | 1097 | 251 | 260 | |
200 | 550 | 560 | 570 | 894 | 1109 | 924 | 1139 | 290 | 302 | |
250 | 670 | 690 | 750 | 1156 | 1368 | 1156 | 1368 | 380 | 422 | |
300 | 740 | 785 | 815 | 1215 | 1427 | 1215 | 1427 | 435 | 484 |
公称通径 DN | L(mm) | A×B | H(mm) | H1(mm) | |||
PN16 | PN40 | PN64 | 普通型 | 热片型 | |||
25 | 185 | 200 | 210 | 230×460 | 668 | 819 | 75 |
40 | 220 | 235 | 251 | 684 | 835 | 95 | |
50 | 254 | 267 | 286 | 684 | 835 | 98 | |
80 | 295 | 317 | 337 | 230×530 | 785 | 946 | 130 |
100 | 350 | 368 | 394 | 795 | 946 | 156 | |
150 | 450 | 473 | 508 | 260×630 | 945 | 1160 | 208 |
200 | 600 | 615 | 650 | 945 | 1160 | 250 | |
250 | 650 | 670 | 690 | 1050 | 1320 | 265 | |
300 | 740 | 770 | 800 | 1145 | 1380 | 295 |
The best quality, first-class service Qigao creates more value for you!
"Qigao Valve" expects to continuously improve service quality and strive for excellence. "Sincere service" is the eternal theme of "Qigao". "Qigao" strictly followsIS09001-2000 Quality system certification requirements, strict quality control, responsibility to people, to ensure the healthy operation of production, sales and service. Strengthen communication with users and provide quality products to our customers with perfection and perfect service. Hereby our factory makes the following commitments:
Product Standards:
Products in strict accordance with ChinaGB、HG Standard and USAPISuch as standard design, manufacturing, acceptance. The hardness of the sealing surface meets the requirements of the state and the width exceeds the national standard.
pre-sale service:
Product introduction, technical exchange, non-standard product design, troubleshooting。
Sale service:
A trustworthy contract guarantees timely delivery and keeps in touch with customers. For special or duplicate products, our factory arranges technicians to use and troubleshoot the products for users.
After sales service:
1、"Qigao" brand product quality period is from the factory12In the month, the implementation of the "three guarantees" service (return, replacement, warranty).
2、During the use of our products, our factory regularly organizes technical and quality inspection personnel to visit and consult users for feedback on product quality, usage status and improvement opinions, so as to further improve product quality.
3、Respond quickly to the quality of user complaints, after-sales service personnel rushed to the scene in 24-36 hours (48 hours outside the province).
4、For after-sales service, users are required to fill out the quality feedback information form after the service and make an appraisal opinion in order to improve the service quality of Qigao.
1、If the customer has special requirements for the product, the following instructions must be provided in the order contract.:
a、Structure length;
b、Connection Type;
c、Nominal diameter, full diameter, reduced diameter, pipe size;
d、Operating medium and temperature, pressure range;
e、Tests, inspection standards and other requirements
2、The factory can configure various types of driving devices according to customer's specific requirements.。
3、If the type and model of the valve are determined by the customer, the customer shall correctly state the meaning and requirements of the model and sign the contract under the condition that the supplier and the buyer understand each other.
4、For futures and order customers, please call us in advance to tell the required valve model, specification, quantity, delivery time and location, and timely transfer to the factory account according to the total 30% deposit or full payment. The rest of the payment is pending. Import before shipment to arrange delivery in time.
Order Process:
1、Customer purchase list fax to021-33872143,Or call us 021-33872141
2、Receive customer purchase list, provide valve model selection and quotation (price list)。
3、Specific agreement: delivery date, special requirements, etc.。
download Google:
1、If the customer has special requirements for the product, the following instructions must be provided in the order contract.:
|
|||||
|
|||||
2、The factory can configure various types of driving devices according to customer's specific requirements.。
|
|||||
3、If the type and model of the valve are determined by the customer, the customer shall correctly state the meaning and requirements of the model and sign the contract under the condition that the supplier and the buyer understand each other.
|
|||||
4、For futures and order customers, please call us first to tell the required valve model, specifications, quantity, delivery time and location, and press the total30%The deposit or full payment will be remitted to our factory account in time., The rest of the payment will be remitted before shipment to arrange delivery in time.。
|
Sale service:
Trustworthy contract, guarantee timely delivery, keep in touch with customers at any time。
For special or duplicate products, our factory arranges technicians to use and troubleshoot the products for users.
After sales service:
1、"Qigao" product quality period is from the factory12Month, practice“Three packs”Service (return, replacement, warranty)。
2、During the use of our products, our factory regularly organizes technical and quality inspection personnel to visit and consult users for feedback on product quality, usage status and improvement opinions.,
In order to further improve product quality。
3、Respond quickly to the quality of user complaints, after-sales service personnel24-36Hours (outside the province48Hour) rushed to the scene。
4、For after-sales service, the user is required to fill out the quality feedback information form after the service and make an appraisal opinion in order to improve the service quality of “Qigao”.。
statement |
|